On 04/02/2016 11:37, gareth wrote:
"Ian Jackson" wrote in message
...
In message , Stephen Thomas Cole
writes
AndyW wrote:
snip
Hope that helps
Sadly, I doubt he understood any of it.
I certainly didn't!

I can well see from Ian's post that the usual infantile whingers
and abusers have responded, and that is only to be expected
given their emotional ages, and so the cesspit against which
they rail continues to be fed with their own effluent.

The _REAL radio amateur understands the innards of his rig
down to the last rheophore, whereas the CBer-masquerading-as-a-radio-amateur
fails to understand even the difference between sideband and sidetone.

The arrival of the general purpose computer opened up the possibility
to _REAL_ radio amateurs of doing their own programming, but, sadly,
although the computer is to be found in many shacks, the programs therein
have largely been of the Cheque book (CB) variety, making even the
traditional _REAL_ radio amateur indistinguishable from the
CBer-masquerading-as-a-radio-amateur for large parts of his shack.


I'm eager to work in the area; anybody out there with relevant experience?

Yes, as I posted I have developed driver for windows and linux. What
language are you looking to develop in?
Is it a stand-alone general purpose driver or are you looking for an
embedded driver for SDR software?
Driver I can handle but interpretation of the data is a different thing
altogether and is likely to be out of my skill set unless the
manufacturer has included some very specific technical data.

Andy