On Wed, 20 Jul 2016 07:05:09 -0700 (PDT),
wrote:

This is the product page which has specs for the unit:

http://m.homedepot.com/p/PetSafe-1-2...-300/100043603

Here is additional information I found about it.


Specifications of the Transmitter:
18 kHz Frequency
Depth: 8.5 inches, Width: 9 inches, Height: 9 inches
250 volt ½ amps fuse
Rounded barrel/front shaped
Low/High dial and boundary controls
The color is Light gray
On the left side there is the Off/On switch
Battery – 6-volt
Depth: 1 inch, Width: 2 inches, Height: 1 inch
Weight: 2.5 OZ.
Waterproof
Indicator for low battery that will signalize a flash of light on every 4-5 seconds
Short and long contact points

Receiver Collar Specifications:
Battery – 6-volt
Depth: 1 inch, Width: 2 inches, Height: 1 inch
Weight: 2.5 OZ.
Waterproof
Indicator for low battery that will signalize a flash of light on every 4-5 seconds
Short and long contact points

Is that at all helpful? If not, could you be a little more specific on what information you need some can try to find it?

Thanks!


This is very similar to what the robot lawnmowers use.

Unfortunately the dog collar is the passive part.
No way to find it with any radio.

w.