"gareth" wrote in message
...
Decided to Power Pole all the 12V gear here (Why I ever decided to put
a detachable 12V lead via an octal plug/socket combination on my HB
QRP 80M rig is beyond me!) and discovered Torberry down in Waterlooville,
Hants.

Ordered enough yesterday, and prompt delivery today!

Well done that firm! (No connection with them (apart from the Power Poles
:-) ) )


For a good number of years a friend and I used some 2 pin Molex type plugs
for the 12 volt power so they would all interchange. They were not rated for
the current of the later devices and started to be difficult to find.

We have now switched over to the power poles like some of the rest of the
country. There is a recommended way to pair them up as sort of a 'standard'
so people in different parts of the country can swap out the gear if wanted.

While there are several varities of them, they make some that use the same
plastic housing and the contacts are different only in the size of wire
they are made for. I think it is the 15, 30,45 amp ones that are that way.

I hope you spent afew more dollars and bought the crimping tool for them.
Makes instlling them well worth the $ 20 or for the tool.