View Single Post
  #1   Report Post  
Old June 5th 16, 12:27 AM posted to rec.radio.amateur.moderated,rec.radio.amateur.homebrew
WB8NUT via rec.radio.amateur.moderated Admin WB8NUT via rec.radio.amateur.moderated Admin is offline
external usenet poster
 
First recorded activity by RadioBanter: Jul 2015
Posts: 13
Default [WB8NUT] DStar, DMR and Fusion Observations & Comments


WB8NUT Blog RSS Feed

///////////////////////////////////////////
DStar, DMR and Fusion Observations & Comments

Posted: 04 Jun 2016 03:19 AM PDT
http://wb8nut.com/blog/files/June_4_...ue-entry-id-79

I've not had the chance to play with Fusion for two weeks. I've had DMR for
just about a year now and DStar for a number of years. So here are my
thoughts thus far.

First, DMR is now growing fast and catching up to DStar in terms of number
of users and repeaters. What has contributed to the growth are a number of
very low cost DMR radios from China. Without the cheap radios, I don't
think the growth would have occurred. At this year's Hamvention, I heard
one vendor was selling the Tytera MD-380 for $99 and R & L had them inside
for $110. Pretty cheap and easy way to get into digital voice.

Alinco announced their DMR radio is coming out so they will be the first
mainstream amateur radio manufacturer with a DMR radio. Price is still
unknown.

Yeasu's Fusion system has caught up with DMR and DStar in terms of the
number of repeaters. In fact, Fusion might have the largest number of
repeaters. This is because Yaesu was offering them for $500 and $600 to
clubs and many club bought them to replace their older repeaters. I mean
for $500 a piece, who can refuse. Trouble is that many of those repeaters
were installed in FM mode only. However, in my area about four are dual
mode FM/Digital so there are a number of Fusion systems that I can hit and
actually use digital voice.

With DMR, there are three wide coverage repeaters in my area. A third
system just came on-line a few weeks ago. So I have plenty of repeaters to
experiment and chat on.

DStar has four repeaters in the area and I have been using them for quite
some time along with the DVAP dongle.

Here is my impressions so far for each of the digital technologies.

DStar still has the most flexibility. Because the radios are designed for
hams, they allow greater flexibility. All DStar radios have a data port
making it easier to connect the radio to a computer or tablet and use an
application for texting and file transfer. There are a number of
applications written to make use of this feature and include, DRATS, DChat
and Ham Radio Deluxe.

None of the three DMR radios I have include a data port. There are still no
text for file transfer programs that I am aware of for use on DMR in spite
of the fact that MARC has a DMR sandbox available for over a year to
provide for such development. So DMR is still pretty much a digital voice
method/and some quick texting within the radios and that is about it.

Fusion, I believe has the ability and I believe some radios have a data
port, but my FTM-3200 does not. I also have not found any text/file
transfer applications for Fusion.

DStar can still pass APRS information to the APRS network. DMR cannot do
this and Fusion cannot do this.

As for repeaters, amateurs can easily build their own DStar repeaters. You
cannot do this (or at least easily do it) with DMR or Fusion. I believe I
read where one ham was able to do it with DMR, but other than that, I have
heard nothing more about home brewing a DMR repeater or a Fusion repeater.
Heck, at this point, why would you even consider building your own Fusion
repeater when Yaesu is almost giving them away?

The cost of a DStar repeater from Icom is moderately expensive, but less
than $2,000 for controller and one band. DMR used repeaters are about the
same and the new repeaters are very expensive. Fusion again is almost free
at this time, but pretty soon Yaesu will stop giving them away.

Depending on where you live, you probably have access to a DStar repeater
close by. With DMR, there are many areas that are very well covered, but
then again there are some states with very low to no coverage. Heck, look
at Missouri where one of the largest cities in America, St. Louis is still
without a DMR repeater! Or course with Fusion, the repeaters are now all
over the place, but again, many are just in FM mode. Seems Yaesu should
have made the repeaters so that they ONLY worked in dual automatic mode.
That was a big marketing error in my opinion.

Let's talk about voice quality. The way I saw others ranks voice quality
was that Fusion was supposed to be the best, followed by DMR and then
DStar. I guess in theory that should be true, but practically, that is not
the case from my observation. Side by side, it is hard to tell a difference
in audio quality between DMR and Fusion. I just don't hear any difference.
DStar is a very close second to DMR and Fusion. DMR and Fusion seem to have
more low response than DStar. DStar does sound slightly crisper to me. In
any case, just not enough difference in my opinion to make any one of the
digital methods any better than the other when making a purchasing decision.

Digital voice recovery. You have all heard about R2D2 with DStar. It is the
sound the signal makes when it is not strong enough to decode. DMR has
something similar that sounds like a high pitched motor boat. I have not
heard what happens when a Fusion signal is getting too weak to decode. I
explain later why that is.

The one thing I really like about DStar and Fusion is the use of call
signs. So when someone transmits, I see their call on my display. In fact,
I also see the calls of the repeaters. With DMR, being a commercial
standard that hams are using, the radio has an ID that is associated to the
callsign. The display however is not automatic like it is with DStar and
Fusion. If you program the radio with other users callsign and radio
number, the radio is then capable of displaying the call. Now most of the
commercial DMR radios are limited to storing 1,000 or less contacts. Only
Connect System radios can go up to slightly over 65,000. Since I have two
Connect System radios, I can load all 35,000+ DMR contacts into my radio.
This is a manual process and has to be repeated every so often to keep the
radios up to date.

Usage of the three is widely different at this point. DStar has kind of
leveled off though DStar radios were selling well at Dayton and Kenwood is
coming out with their DStar radio this Fall. DMR use has exploded as I
mentioned previously due to the availability of low cost radios. Fusion on
the other hand has few users compared to the other two. I wonder if the low
cost of the DMR radios is having an impact on this. So far with numerous
calls on Fusion repeaters, I have only had one person respond. The only
other activity has been weekly nets and those have sparse checkins.

So all three work. It depends on the area you live at this point as to what
technology you go with because you want a repeater and you want others to
talk to. Many are going with multiple technologies if their budgets can
handle it.

Check the repeaters maps to see what repeaters are available in your area.
But even if you have Fusion repeaters in your area, and a lot of them, just
remember, if you are like me, that does not mean a lot of hams in the area
are going to have radios. If you have DMR or DStar repeaters in your area,
there is a good chance there are users so you are probably safe going with
either or both. If you are cheap like many hams and have DMR repeaters in
your area, pick up a Tytera MD-380.

Oh, and for DMR, you want to find someone in your area who will share
their "code-plug" with you. A code-plug is just the terminology used in DMR
which means the programming file. You can also find them all over the
Internet for your area. Just download, enter your call, and some other
basic information, load to the radio and start talking.

I'll comment about networking of the three technologies in another upcoming
blog.