View Single Post
  #3   Report Post  
Old March 28th 04, 10:48 PM
William J. Wolfe
 
Posts: n/a
Default

(D.) wrote in message . com...
Hi,
I am beginner .. sorry if some of this seems like stupid question(s):

I have installed a ICom F2010(2020) into my Jeep.
The radio unit itself is installed in the back where the CD changer
was, the antenna cable is a bit too long, so it is stored in a loop.
Control unit is seperated with 8 meter cable from main unit and is
mounted underneath the ashtray (so basically it is sitting above the
gear box).

The antenna is mounted on the roof the car:
A GME 409L (ground independend), mounted on a spring S004

Frequencies used are in the 460Mhz-490Mhz range.

The problems I am experiencing now:
- Whenever the unit is Rx ... I can hear a whisling sound, which is
only audible if I accelerate (there seems to be a relationship to the
RPMs ?)


Alternator noise. Rock on down to your local car radio shop and buy a
noise filter for the alternator.