Burt wrote:
I was using my radio just fine, than I unplugged it and moved it a few feet
and now it is almost dead. I can hear a relay engage when I first turn it on
and fall off about 10 seconds after I turn it off.
What happened?
-The batteries backing up the SRAM holding your transceiver's operating
system went dead; you will need to send it back to ICOM for reprogramming.
Or, if you're lucky, one of the replacement boards offered by third parties
come with preprogrammed software.
The reason? For some strange reason, ICOM decided to keep the OS in SRAM,
which loses its contents if power is removed. Probably, SRAM chips were
a few cents cheaper than a similar-sized EPROM. Tough luck.
Do a google search on "ICOM 751 SRAM battery backup board" or something
to that effect, and you should find a solution.
Myself, I modified the original board so that two battery cells were
connected in parallell, separated by a schottky diode. That way, I can simply
change one battery at a time without losing the data which keeps my rig
ticking.
--
73 de LB1LF
Odd Erling, ARK
Why did kamikaze pilots wear helmets?
|