M0NWK
///////////////////////////////////////////
RECEIVE ADS-B USING SDRPLAY / DUMP1090 / VIRTUAL RADAR SERVER
Posted: 28 Oct 2020 04:35 PM PDT
http://www.m0nwk.co.uk/receive-ads-b...-radar-server/
This blog shows hardware, software and configuration that enables me
toÂ*receive and decode ADS-B transmissions from aircraft and plot them on a
map.
Click on the continue button to see more.
This is still work in progress and I have more details and photos to come,
but here are all of the steps required to start receiving ADS-B using
SDRplay RSP receiver and dump1090 and Virtual Radar Server.
Software installation & configuration
Step 1: API/HW Driver 3.07
I navigated to:
https://www.sdrplay.com/downloads/
And downloaded: API/HW Driver 3.07
I then installed the software on my PC using default settings.
Step 2: ADS-B dump1090
From the same site
https://www.sdrplay.com/downloads/ IÂ*downloaded: ADS-B
(dump1090) 1.47
Then installed the software on my PC using default settings.
Step 3: Virtual Radar Server
I navigated to:
http://www.virtualradarserver.co.uk/Download.aspx
And downloaded: Version 2.4.4
I then installed the software on my PC using default settings.
Step 4: Virtual Radar Server configuration
Open Virtual Radar Software application.
Click on Tools Options
Change / check configuration:
Format = AVR or Beast Raw Feed
Address = 127.0.0.1
Port = 30005
Hardware
Step 5: RSP connection
Attach your RSP to your computer.
Step 6: ADS-B antenna
Connect suitable antenna to your RSP.
Receive & decode ADS-B
Step 7: Start dump1090
Go to SDRplay folder / menu and click on:
Start dump1090 in* where * = mode
If antenna is good and software configuration correct you should start
receiving ADS-B transmissions from aircraft.
Step 8: Start Virtual Radar Software
Open Virtual Radar Server application.
Messages received in dump1090 will now be displayed in the Feed status
Step 9: Virtual Radar Server map
Click on
http://127.0.0.1/VirtualRadar
The Virtual Radar Server map will now open and display aircraft.