Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]() "w4jle" W4JLE(remove this to wrote in message ... Well said Sir! Even the "appliance operators" of old had to know how the appliance worked. Were I the FCC, your first transmitter and receiver would be built from scratch and a minimum of 25 CW contacts confirmed before the use of a purchased rig would be allowed. Careful, one of the local Ham "Channelmasters" will dub you a CBPlusser for using the term "contact". It's a pet peeve of his. Harold Burton KD5SAK |
#2
![]() |
|||
|
|||
![]()
Just like I had some "newby" attempt to chastise me on a 2 meter repeater
for using "handle". He told me that that word was only used on 11 meters. I had to admit, I did use it on 11 meters when it was a ham band. But thanks for the lesson Good Buddy! "Harold Burton" wrote in message ... "w4jle" W4JLE(remove this to wrote in message ... Well said Sir! Even the "appliance operators" of old had to know how the appliance worked. Were I the FCC, your first transmitter and receiver would be built from scratch and a minimum of 25 CW contacts confirmed before the use of a purchased rig would be allowed. Careful, one of the local Ham "Channelmasters" will dub you a CBPlusser for using the term "contact". It's a pet peeve of his. Harold Burton KD5SAK |
#3
![]() |
|||
|
|||
![]()
Handle was used on the HF ham bands before most of the readers were born.
Steve K;9;D;C;I "w4jle" W4JLE(remove this to wrote in message ... Just like I had some "newby" attempt to chastise me on a 2 meter repeater for using "handle". He told me that that word was only used on 11 meters. I had to admit, I did use it on 11 meters when it was a ham band. But thanks for the lesson Good Buddy! |
#4
![]() |
|||
|
|||
![]()
Harold Burton wrote:
SNIP Careful, one of the local Ham "Channelmasters" will dub you a CBPlusser for using the term "contact". It's a pet peeve of his. Harold Burton KD5SAK It may be a 'pet peeve' but what do you call: "T40E 599 TU de W1MCE" For me it's a contact! It is not a QSO. It is not a Rag Chew. It's the minimum requirement for a DXCC type CONTACT. BTW: is it Harold Burton or HALLIBURTON?? Hmmm ... ??? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Ethernet "thicknet" coax thru walls of house for ham radio antenna | Antenna | |||
Keeping moisture out of 9913 type coax? | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
Burying Coax | Antenna | |||
Length of Coax Affecting Incident Power to Meter? | Antenna |