Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #11   Report Post  
Old August 8th 06, 10:32 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 148
Default Engineers

On Tue, 8 Aug 2006 15:39:16 +0100, Reg Edwards wrote:
Any Tom, Dick and Harry can copy and build a circuit out of a book.


I wish you would cease the TROLLing whenever you get bored... I know
there are soooooo many easy foils here for your outbursts. But, just
because a thing is do-able does not mean it should be done.

Jonesy
--
Marvin L Jones | jonz | W3DHJ | linux
38.24N 104.55W | @ config.com | Jonesy | OS/2
*** Killfiling google posts: http//jonz.net/ng.htm
  #12   Report Post  
Old August 8th 06, 10:34 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 10
Default Engineers - Photo 16b.jpg (0/1)

On Tue, 08 Aug 2006 16:39:13 GMT, "Frank's"
wrote:
[snip]

Rats, now you have me intrigued Walt. Too bad the pic did not work.
Just tried to post a picture, but it seems there is a filter on the NG to
prevent such postings.

Reg, have made a lot of progress in developing a NEC 4 model
of a 100 radial system. Just have to iron out a few bugs. When this
is completed I can try some high frequency models.

Frank


Walt was nice enough to send me the graphic and, so others can see it,
I've placed it on my web page for your viewing pleasure.

http://k6mhe.com/sub/w2du_engineering.jpg

Note: This will available for about 30 days.

Danny, K6MHE

  #13   Report Post  
Old August 8th 06, 10:37 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 10
Default Engineers - Photo 16b.jpg (0/1) - Photo 16a.jpg (0/1)



Rats, now you have me intrigued Walt. Too bad the pic did not work.
Just tried to post a picture, but it seems there is a filter on the NG to
prevent such postings.

Reg, have made a lot of progress in developing a NEC 4 model
of a 100 radial system. Just have to iron out a few bugs. When this
is completed I can try some high frequency models.

Frank



Walt was nice enough to send me the graphic and, so others can see it,
I've placed it on my web page for your viewing pleasure.

http://k6mhe.com/sub/w2du_engineering.jpg

Note: This will available for about 30 days.

Danny, K6MHE

  #14   Report Post  
Old August 8th 06, 10:57 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 2,951
Default Engineers - Photo 16b.jpg (0/1)

On Tue, 08 Aug 2006 14:34:50 -0700, Dan Richardson
wrote:

Walt was nice enough to send me the graphic and, so others can see it,
I've placed it on my web page for your viewing pleasure.

http://k6mhe.com/sub/w2du_engineering.jpg


"There cannot be a greater mistake than that of looking superciliously
upon practical applications of science. The life and soul of science
is its practical application."
- Bill Thomson
  #15   Report Post  
Old August 8th 06, 11:19 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 162
Default Engineers

Ya, but...5 out of 4 engineers are dyslexic...

Scott
N0EDV

Reg Edwards wrote:

Any Tom, Dick and Harry can copy and build a circuit out of a book.

But it takes a top-class engineer just to look at a strange circuit
and describe what it does, how it works.

These days, there are mostly Tom's, Dick's and Harry's!
====================================
Amendment -

For "circuit" read "antenna".

"Tom's, Dick's and Harry's" has replaced "old wives". ;o) ;o)

====================================




  #16   Report Post  
Old August 9th 06, 12:45 AM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 167
Default Engineers - Photo 16b.jpg (0/1)


Reg, have made a lot of progress in developing a NEC 4 model
of a 100 radial system. Just have to iron out a few bugs. When

this
is completed I can try some high frequency models.

Frank

=========================================

Frank, don't forget to use a 1/4-wave vertical when calculating
efficiency.

I assume you always include the power in the ground wave in the total
power radiated when calculating efficiency.

I think radial length intervals of 0.5 metres will be OK for 100 or
more radials.
----
Reg.


  #17   Report Post  
Old August 9th 06, 01:37 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 56
Default Engineers - Photo 16b.jpg (0/1) - Photo 16a.jpg (0/1)


"Dan Richardson" wrote in message
...


Rats, now you have me intrigued Walt. Too bad the pic did not work.
Just tried to post a picture, but it seems there is a filter on the NG to
prevent such postings.

Reg, have made a lot of progress in developing a NEC 4 model
of a 100 radial system. Just have to iron out a few bugs. When this
is completed I can try some high frequency models.

Frank



Walt was nice enough to send me the graphic and, so others can see it,
I've placed it on my web page for your viewing pleasure.

http://k6mhe.com/sub/w2du_engineering.jpg

Note: This will available for about 30 days.

Danny, K6MHE


At first glance I thought of the multiplexed FM broadcast antennas on One
Shell Plaza in Houston 33 years ago..

73
H.
NQ5H


  #18   Report Post  
Old August 9th 06, 03:49 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 146
Default Engineers - Photo 16b.jpg (0/1)


I used the 'help' menu in Agent, but it doesn't seem to let me post an
attachment.


In order to post a jpg you would need to essentially convert it to
text. I think a program called uuencode does it.
Then it comes out looking like 15,000 lines of garbage to anyone
reading the articles here. It would make you a lot of enemies faster
than calling CQ on 14336.

Put it another way - the rec.radio newsgroups are text only.

Rick K2XT
  #19   Report Post  
Old August 9th 06, 04:37 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 56
Default Engineers - Photo 16b.jpg (0/1) - Photo 16a.jpg (0/1)


"Dan Richardson" wrote in message
...


Rats, now you have me intrigued Walt. Too bad the pic did not work.
Just tried to post a picture, but it seems there is a filter on the NG to
prevent such postings.

Reg, have made a lot of progress in developing a NEC 4 model
of a 100 radial system. Just have to iron out a few bugs. When this
is completed I can try some high frequency models.

Frank



Walt was nice enough to send me the graphic and, so others can see it,
I've placed it on my web page for your viewing pleasure.

http://k6mhe.com/sub/w2du_engineering.jpg

Note: This will available for about 30 days.

Danny, K6MHE


Thanks Danny,

Frank


  #20   Report Post  
Old August 9th 06, 06:08 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 444
Default Engineers

Scott wrote:

Ya, but...5 out of 4 engineers are dyslexic...


Eye dish garee wthi ttha marekr!

/s/ DD, + froutie yeers na nerieng.

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
"The Radio Handbook" Editors and Engineers 9th Edition, 1942 David Stinson Boatanchors 1 January 9th 05 05:48 PM
FS: Palomar Engineers PT-340 Tuner-Tuner Bob Parnass, AJ9S Swap 0 February 20th 04 02:10 AM
FS: Palomar Engineers MDB-2 Magnetic Balun Victor Trucco Shortwave 1 January 26th 04 01:38 AM
For the electrical engineers Tdonaly Homebrew 0 September 26th 03 12:51 AM


All times are GMT +1. The time now is 09:33 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017