"Walter Maxwell" wrote in message
...
On Mon, 14 Aug 2006 07:44:10 GMT, "Lee"
wrote:

I`m building a QFH NOAA weathersat antenna and wish to use low loss t/v
coax
which is
72ohm; but is more manageable and less lossy at VHF than the 50ohm RG58
specified
over a 100ft run!.... ( RF pre-amps aint cheap! ).......

What are the pros and cons... can i use CT100 72/75ohm..... i believe i
can
but, will the impedence affect
the 4 turn choke ????...

Thanks.

Lee......de G6ZSG.....

Hi Lee,

Consider this: If your QFH has a 50-ohm terminal impedance, the mismatch
is only
1.44: 1. Therefore, the loss due to the mismatch is 0,14 dB,
insignifiant--use
the 72-ohm line and forget the miniscule mismatch.

Even if the mismatch was 2:1, the reflection loss is only 0.51 dB.

Concerning the 4-turn choke, nothing happens to the matching operation,
because
nothing inside the coax changes due to the coiling of the coax.

Walt, W2DU