| Home |
| Search |
| Today's Posts |
|
|
|
#1
January 3rd 04, 11:31 PM
|
|||
|
|||
Why not model it exactly how it is? Plot the coordinates,
of the elements, crank the 'knob' and see what comes out. Can you use an antenna analyzer? I would think that you could. 'Doc |
|
#2
January 4th 04, 06:44 PM
|
|||
|
|||
|
Howdy,
Thanks for the reply. I can of course aquire antenna analyzer and study instructions. G Regards, Jim -- email sent to: is discarded without being seen. Sorry for any inconvenience. "'Doc" wrote in message ... Why not model it exactly how it is? Plot the coordinates, of the elements, crank the 'knob' and see what comes out. Can you use an antenna analyzer? I would think that you could. 'Doc |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Methods for ladder line feed on rotatable antenna? | Antenna | |||
| 70 ohm dipole to 50 ohm feed line question | Antenna | |||
| Populating my tower from scratch... need opinions on antennas. | Antenna | |||
| EZ Way tower sheared hinge pin conclusion(?) | Antenna | |||
| EZ Way tower sheared hinge pin | Antenna | |||
Hybrid Mode
