Home |
Search |
Today's Posts |
#3
![]() |
|||
|
|||
![]() "Dave Platt" wrote in message ... : In article YoGKg.3053$CL6.2183@trnddc06, : Amerigo Vespucci wrote: : : I don't have any 300 ohm twin leed and really(at this time) don't feel like : doing the copper pipe thing .Is there another easy way to make one.My : thoughts were to maybe take and attach some wires to a board say a 1x4 and : just make it work accordingly. : : Sure, you can make that work. You'll need to fiddle with the lengths : of the elements, and the attachment point of the coax to the matching : section to get the best match. Using an MFJ or similar antenna : analyzer will make the job easier. : : I built a J-pole somewhat like this by taping ordinary insulated : hookup wire to the fiberglass shaft of a bicycle safety flag. It took : a while to get the lengths and feedpoint position adjusted correctly, : but once it was done I had an antenna which was 1.5:1 or better across : the entire 2-meter band, and works very nicely when I ride "bicycle : mobile" at a public-service event. : : If you aren't planning to transmit, you probably will have an easier : job of it - your scanner will work acceptably even with a significant : amount of mismatch at the antenna feedpoint. : : I'd suggest thoroughly waterproofing whatever piece of wood you use - : treat it well with marine spar varnish or a similar outdoor-rated : polyurethane or other varnish. This will ensure that the wood doesn't : soak up rain moisture and change its electrical characteristics and : de-tune the antenna. : : As another alternative, since you're scanning and would presumably : prefer a wide antenna bandwidth, would be to make yourself a skeleton : discone. A chunk of wood with holes drilled in it, and a dozen pieces : of stiff wire, and a bit of simple soldering and you'd end up with an : antenna which would probably receive acceptably over a very wide : bandwidth. The skeleton discone sounds like a neat idea.Do you have a diagram or something for that? Oh BTW I am a ham I am just working with limited resources at the moment. Call hre is Kilo Alpha 3 Victor India Delta . Nice to make the aquaintance. : : -- : Dave Platt AE6EO : Hosting the Jade Warrior home page: http://www.radagast.org/jade-warrior : I do _not_ wish to receive unsolicited commercial email, and I will : boycott any company which has the gall to send me such ads! |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
QUESTION: Roach/Squid Pole Antenna for 10, 20 and 40m? | Antenna | |||
Fishing pole element construction facts | Antenna | |||
Low band noise (a possible "hot pole" nearby) | General | |||
vertical di pole | Shortwave |