LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #12   Report Post  
Old September 13th 06, 12:26 AM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jun 2006
Posts: 1,374
Default Is antenna a transducer to 377 ohms?

Peter O. Brackett wrote:

Correct, but don't we all believe that the wave impedance of "free space" is
approximately 377 Ohms...

Everywhere...

Even in the near field of an antenna.

That is an antenna itself has no effect on the fundamental u and e of the
media in which it is immersed. u and e are defined only in terms of and as
affecting "plane wave" [TEM mode?] propagation, and...

After all the antenna is very small, and free space is very large (grin),
and so a tiny antenna cannot change u and e everywhere!

The fields E and H in the "near region" of an antenna where the waves are
not "plane" on the other hand may not be related by 377 Ohms, simply because
the waves emanating from the "near" antenna are not plane, but...

There might just also be plane waves passing through identically the same
region of space, say emanating from a more distant antenna. The ratio for
those plane E and H fields will indeed be 377 Ohms over the exact same
region of space where Zo is different because of simultaneous but non-planar
waves.

So in fact... the wave impedance of free space can have many values
simultaneously, one [universal?] constant value of ~377 Ohms for plane
waves, while it may have many other [arbitrary] values for waves passing
through the same region of space that are not plane.

Thoughts, comments?


I don't believe I've ever encountered the term "wave impedance of free
space", and its use is certain to cause confusion, as I sense here.

The *intrinsic* impedance of free space is 377 ohms. The *wave*
impedance of an EM wave in that medium is 377 ohms if it's a plane wave
in the far field of a radiator, and some other value if it's close to an
antenna or other conductor or dielectric. The *intrinsic* impedance of
free space is determined only by the conductivity, permittivity, and
permeability of the medium; the impedance of a wave is governed not only
by the intrinsic impedance of the medium but also other factors.

If you have a reference that defines and uses the term "wave impedance
of free space", I'd like to look it up to see how the author deals with
this potentially confusing combination of terms. If it does indeed "have
many values simultaneously", it's pretty useless in my opinion.

Roy Lewallen, W7EL

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Why Tilt ? - The Terminated Tilted Folded Dipole (TTFD / T2FD) Antenna RHF Shortwave 2 April 18th 06 10:21 PM
Putting a Ferrite Rod at the Far-End of a Random Wire Antenna ? RHF Shortwave 22 November 15th 04 08:15 PM
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} RHF Antenna 27 November 3rd 04 01:38 PM
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} RHF Shortwave 23 November 3rd 04 01:38 PM
50 Ohms "Real Resistive" impedance a Misnomer? Dr. Slick Antenna 255 July 29th 03 11:24 PM


All times are GMT +1. The time now is 09:52 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017