Home |
Search |
Today's Posts |
#14
|
|||
|
|||
Bill,
It really is better if a connector is installed as it's designed to be installed. It may not be the easiest way of doing it, but it's almost always the best way. Having said that, I've found that using a propane torch is the easiest way I've found to put on a PL-259. Takes a little practice (and don't use MAP gas!), but not a problem even in high winds. It helps to pre-tin any adaptors, etc. 'Doc |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Attaching wire to tubing?? | Antenna |