Because of restrictions i am unable to put up a two meter fm vertical
antenna. What is the feasability of putting up a random or long wire
antenna for the two meter fm band? Doing a Google search i could not
find any information concerning the above. Any assistance would be
appreciated. Thank You.

N3 wrote:
Because of restrictions i am unable to put up a two meter fm vertical
antenna. What is the feasability of putting up a random or long wire
antenna for the two meter fm band? Doing a Google search i could not
find any information concerning the above. Any assistance would be
appreciated. Thank You.

You can try several thinks. One is a J-Pole antenna, if you have enough room.
It can be made from clear twin lead, like the kind that come with FM stereo
systems.

Another choice would be a dipole. Two 19 inch pieces of wire will do fine.

Using the right thickness of wire and small enough coax would make it almost
impossible to see.

Due to the polarization issue, a horizontal wire is not very usefull

You can also find if you look around a base for a "rubber duckie" type antenna
that has a suction cup. You use it to put mount your antenna on a window
while you are using it.

73,

Geoff.


--
Geoffrey S. Mendelson, Jerusalem, Israel N3OWJ/4X1GM
IL Voice: (07)-7424-1667 Fax ONLY: 972-2-648-1443 U.S. Voice: 1-215-821-1838
Visit my 'blog at http://geoffstechno.livejournal.com/

A vee beam or rhombic set up would give you impressive gain, albeit
with a narrow beamwidth... All the factors would have to be right...
I won't take the time to do the search for you, but 'try vhf rhombic'
for starting a search... Older ARRL VHF antenna books address this
issue...

If you can run a wire out the window, you can run a rope.. Think about
a homebrew, long boom Quagi/Yagi, but with the elements vertical...
Again, what directions are available to you... Also a broadside array
could be suspended from a rope for directions opposite the direction of
the rope...

denny / k8do

"Denny" wrote in message
ups.com...
A vee beam or rhombic set up would give you impressive gain, albeit
with a narrow beamwidth... All the factors would have to be right...
I won't take the time to do the search for you, but 'try vhf rhombic'
for starting a search... Older ARRL VHF antenna books address this
issue...

If you can run a wire out the window, you can run a rope.. Think about
a homebrew, long boom Quagi/Yagi, but with the elements vertical...
Again, what directions are available to you... Also a broadside array
could be suspended from a rope for directions opposite the direction of
the rope...

denny / k8do

Of what use is a directional antenna on 2M if you cannot rotate it?

Dale W4OP

On Mon, 09 Oct 2006 18:19:29 GMT, "Dale Parfitt"
wrote:
"Denny" wrote in message
oups.com...
A vee beam or rhombic set up would give you impressive gain, albeit
with a narrow beamwidth... All the factors would have to be right...
I won't take the time to do the search for you, but 'try vhf rhombic'
for starting a search... Older ARRL VHF antenna books address this
issue...

Of what use is a directional antenna on 2M if you cannot rotate it?

Dale W4OP

Hi Dale,

I couldn't resist.

If you make the rhombic with stretchable mounting points (and do not
load the end of the rhombic, so as to make it bi-directional) you can
change the major axis. This would alter EW to NS, and, I bet, if you
didn't stretch it strictly to the typical elongated axis (the major
axis) you would probably fill in the lobes in between.

However, this (admittedly rube Goldberg design) and the original
suggestion of a rhombic seems prohibitive in a neighborhood already
far too sensitive to even a quarterwave vertical.

73's
Richard Clark, KB7QHC

"N3" wrote in message
oups.com...
Because of restrictions i am unable to put up a two meter fm vertical
antenna. What is the feasability of putting up a random or long wire
antenna for the two meter fm band? Doing a Google search i could not
find any information concerning the above. Any assistance would be
appreciated. Thank You.

I had a home made 1/4 wave ground plane vertical in the attic. Worked as
well as an Isopole on the roof. Gave away the Isopole. If you don't have an
attic, try the top of a closet. If you give up one radial, you can tape the
whole thing to walls and the front of the shelf.

Tam/WB2TT

Richard Clark wrote:

Hi Dale,

I couldn't resist.

If you make the rhombic with stretchable mounting points (and do not
load the end of the rhombic, so as to make it bi-directional) you can
change the major axis. This would alter EW to NS, and, I bet, if you
didn't stretch it strictly to the typical elongated axis (the major
axis) you would probably fill in the lobes in between.

However, this (admittedly rube Goldberg design) and the original
suggestion of a rhombic seems prohibitive in a neighborhood already
far too sensitive to even a quarterwave vertical.

73's
Richard Clark, KB7QHC

Richard

I'm not sure who you are responding to, certainly NOT the original
poster. He can't put up a quarter wave, let alone an effing RHOMBIC!

I am amazed at how these threads can take off in only 3 responses into
something that has absolutely nothing to do with the question that was
asked.

-----------------------------

N3

Please contact me directly at the address shown on this post, and I will
attempt to help you.

tom
K0TAR

Richard Clark wrote:

Hi Dale,

I couldn't resist.

If you make the rhombic with stretchable mounting points (and do not
load the end of the rhombic, so as to make it bi-directional) you can
change the major axis. This would alter EW to NS, and, I bet, if you
didn't stretch it strictly to the typical elongated axis (the major
axis) you would probably fill in the lobes in between.

However, this (admittedly rube Goldberg design) and the original
suggestion of a rhombic seems prohibitive in a neighborhood already
far too sensitive to even a quarterwave vertical.

73's
Richard Clark, KB7QHC

One thing the newcomers to the group should know, and this information
should be passed on on a regular basis, is that Richard is one of the
most intelligent people here. Unfortunately, he is about the least
helpful person here. He seldom answers questions directly, although he
will try to pretend he is trying to make you learn something. He is
not, he is simply showing you how much more knowledgeable he is than
everyone else.

In this case the poster could not put up a quarter wave, and asked about
putting up a long wire. Obviously if the poster couldn't put up a
long wire, a flexible rhombic, which is absurd on the face of it, would
be absolutely unacceptable.

tom
K0TAR


tom
K0TAR

N3 wrote:
Because of restrictions i am unable to put up a two meter fm vertical
antenna. What is the feasibility of putting up a random or long wire
antenna for the two meter fm band? Doing a Google search i could not
find any information concerning the above. Any assistance would be
appreciated. Thank You.

I find it hard to imagine a 2M antenna that is easy to spot from a
short distance away. However, the first 2M antenna I made took 5 pieces
of copper wire, each 19 inches long, and a SO239 coax fitting (The
type used on a panel, that has 4 holes in a flange to bolt it on). Four
of the wires are bent at the end to make a short leg "L". the short leg
is poked through the connector flange and soldered. The remaining wire
is soldered into the center fitting of the connector, from the back.
This is now a "Ground plane antenna". if the four wires pointing out
from the connector are bent down at about 15-20 degrees, it should
match 50 Ohms, or near it.
Mine started life hanging from a light fixture in my bedroom, connected
to the transmitter with a short piece of Coax. With 3 Watts, I could
hit a repeater 30 Miles away.
Good luck- Bill-W4BSG

On Tue, 10 Oct 2006 21:01:53 -0500, Tom Ring
wrote:
Richard Clark wrote:
Hi Dale,

I'm not sure who you are responding to

Hi Tom,

I thought I would cut down the intervening criticism to reveal the
answer.

73's
Richard Clark, KB7QHC