"Merlin-7 KI4ILB" wrote in message
. ..
Ok which one would you recommend?

http://www.mouser.com/search/Refine.... f&N=1323038+0

Thanks
joe



I've been able to mail order most any electrical part from Mouser. No
minimum order. And it puts you on the list for their huge catalog.

bob
k5qwg



vertical without having to cut it.

I did exactly this (20 years ago). I used a variable compression
trimmer
capacitor to check that I could actually get a low SWR, measured it,
and
fitted the nearest value disc ceramic (rated at 500VDC). I think it
was
330pF. No problems with 40W.
Ian.


I once saw a 102" whip on a motor home that had literally been wound into a
4 " dia coil about half way up! It looked like one of those CB "big coil"
trucker antennas except it was all in one piece. I can only surmise that he
heated it and wound it around some sort of form. It shortened the thing down
to less that 5 feet. But, then, wouldn't that take the temper out of the
steel and make it flop over the next time it was hit? There was also no
evidence of heating, either; it looked like it had been formed at the
beginning of its life. Anybody ever see anyone do this before. If so, how
was it done?

73

Jerry
--