Home |
Search |
Today's Posts |
#10
![]() |
|||
|
|||
![]()
Merlin-7 KI4ILB wrote:
The 11 meter and the 10 meter rigs will not be on at the same time. How would you place the antennas to keep the interaction as low as possible or use the ineraction in some way. Avoid any interaction at all by switching in a 330 pf series capacitor for 10m operation and use one vertical for both bands. But before you do anything, measure the SWR of that 102 inch vertical on 10m. EZNEC says it will be only about 1.5:1, close enough to a match for most people. Or compromise and cut the vertical to resonance on a frequency half way between 11m and 10m. I'll bet the SWR will be acceptable on both bands. -- 73, Cecil http://www.w5dxp.com |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Loop Antennas / minijack works-clips don't / impedence?? | Shortwave | |||
Passive Repeater | Antenna | |||
ABOUT - Making a SWL Antenna out of 300 Ohm Twin Lead and TV Coax Cable | Shortwave | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Shortwave |