Reg Edwards wrote:

I wonder why most commercial finals are protected from a high SWR
by foldback circuitry to avoid damage to the finals?

They don't. There isn't an SWR meter on the station.

Reg, I'm talking about commercially manufactured ham radio
finals. Virtually every single one of them has protection
circuitry and virtually every one of them has a built-in
SWR metering system.
--
73, Cecil http://www.qsl.net/w5dxp



-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----

Cecil Moore wrote:

Reg Edwards wrote:

I wonder why most commercial finals are protected from a high SWR
by foldback circuitry to avoid damage to the finals?


They don't. There isn't an SWR meter on the station.


Reg, I'm talking about commercially manufactured ham radio
finals. Virtually every single one of them has protection
circuitry and virtually every one of them has a built-in
SWR metering system.

I'll stand to be corrected because my RF design activity, C-Band and
S-Band satellite circuits, ended in the mid 80s. Back then, an antenna
load outside of the design range causes higher emitter currents in the
bi-polar solid state devices. These higher currents are the damage
producers. So, circuits were added to control the maximum emitter
current. Today's semiconductor technology is different but I still
suspect that localized voltage or current stresses are a function of the
load.

We used to design for a plasma enhanced environment with an intrinsic Zo
range between 120 to 377 ohms, or, slightly more than 3:1 VSWR at the
antenna. BTW, the circuits continued to operate at almost 10:1 VSWR!!

Cecil, why do you insist on deliberately missing the point?

There is NO SWR meter!

It is a misnomer.

It is a TLI.

This misrepresentation continues to confuse, mislead people trying to
understand what is really a very simple application of an antenna tuner.

In this application the phrase SWR should be banned from the dictionary.
---
Reg, G4FGQ

.................................................. ..........
Regards from Reg, G4FGQ
For Free Radio Design Software go to
http://www.btinternet.com/~g4fgq.regp
.................................................. ..........

Reg Edwards wrote:
Cecil, why do you insist on deliberately missing the point?
There is NO SWR meter!

Reg, my name "Cecil" means "blind" but I'm not blind. Should
I change my name? A rose by any other name smells just as sweet.
The thing is named an "SWR Meter". It's written right on all of
mine. Never mind that all it does is a phasor addition between
a voltage proportional to the voltage and a voltage proportional
to the current.
--
73, Cecil http://www.qsl.net/w5dxp



-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----