| Home |
| Search |
| Today's Posts |
|
|
|
#1
|
|||
|
|||
|
Denny wrote:
This is not a forum for operating systems... Let us get back on topic, folks... Still, a better topic to read than most of the dreck on here. I am homebrewing (if that term isn't overkill) a dipole and am using PVC joints...a T in the middle and straight connectors for the ends. Will these need to be treated (painted, etc) for UV protection? Richard, feel free to give this one a pass. ![]() You're a good guy, it's just that your prose borders on word salad sometimes (hold the pedantic dressing) John AB8O |
|
#2
|
|||
|
|||
|
jawod wrote:
I am homebrewing (if that term isn't overkill) a dipole and am using PVC joints...a T in the middle and straight connectors for the ends. Will these need to be treated (painted, etc) for UV protection? My experience: White PVC turns brittle under TX and AZ UV rays. -- 73, Cecil http://www.w5dxp.com |
|
#3
|
|||
|
|||
|
I have unpainted PVC poles up in Michigan and they have held up for
years with just a bit of powdering of the surface... If you are using the dipole for a year or three leave it bare... If you think it may be up for decades, spray with a dark color paint to block UV... denny |
|
#4
|
|||
|
|||
|
GREY PVC
jawod wrote: Denny wrote: This is not a forum for operating systems... Let us get back on topic, folks... Still, a better topic to read than most of the dreck on here. I am homebrewing (if that term isn't overkill) a dipole and am using PVC joints...a T in the middle and straight connectors for the ends. Will these need to be treated (painted, etc) for UV protection? Richard, feel free to give this one a pass. ![]() You're a good guy, it's just that your prose borders on word salad sometimes (hold the pedantic dressing) John AB8O |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|