Home |
Search |
Today's Posts |
#10
![]() |
|||
|
|||
![]()
Jimmie D wrote:
This afternoon while cleaning a closet I pulled out an old US map that had been marked with contacts I made back when I worked 10M a lot. After the local stations there is a big empty area on the map then I started making contacts again at about 300 miles. Antenna used was a 1/4 lambda groundplane with the radials drooping so to match 50 ohms. A chart I found indicates that this means I have a vertical angle of radiation of 50 to 60 degrees. Is this correct??. I didnt think the angle would be so great for this antenna. BTW the antenna was about 30 ft off the ground when in use. Jimmie What is missing is the altitude of the reflecting zone. The altitude of the E, F1, F2 layers very greatly depending on solar activity, season and time of day. There are so many variables in propagation that is is impossible to definitely state what the path and angle were. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Electromagnetic Radiation | General | |||
Electromagnetic Radiation | Policy | |||
Angle of Radiation | Antenna | |||
Radiation angle vs turns count in a coil | Antenna | |||
Electromagnetic radiation | Shortwave |