On Sun, 01 Feb 2004 20:36:18 GMT, " Art Unwin KB9MZ"
wrote:

Eznec cannot deal the way we want with lumped loads

Art,

This is baloney.

73's
Richard Clark, KB7QHC

Richard you are so quick to show an example of what Cecil was talking
about.but then it is to be expected.
Talk but no walk
If you had studied engineering instead of getting a degree
in shakespear and shakesperian literature you would have realised that
exposing yourself on center stage not only makes you apear effeminate but
devoid of factual information to cover your own inadequacy,.which clearly
shows now that Roy is not around to hang onto his coattails.
Eznec cannot in anyway create a circuit that can emulate
a lumped load. If one took a look at the underpinnings
of complex circuitry you will immediatly understand that all variables are
interconnected with each other for legitamate equivalency. The Eznec program
only has a following because of its longevity because of its inability to be
proactive in dealing with variables.. For true equivalency everything must
be treated as variable for legitamcy until the number crunching is
finished.and most modern programs have that ability which does not in anyway
demean old antenna programs which are now eclipsed by the new.
Frankly Richard you should have stayed in the navy
where your particular atributes aparently attracted
many that were starved of companionship than being
uniterested in physical facts.

Art KB9MZ XG


"Richard Clark" wrote in message
...
On Sun, 01 Feb 2004 20:36:18 GMT, " Art Unwin KB9MZ"
wrote:

Eznec cannot deal the way we want with lumped loads

Art,

This is baloney.

73's
Richard Clark, KB7QHC

On Sun, 01 Feb 2004 21:17:20 GMT, " Art Unwin KB9MZ"
wrote:
Eznec cannot in anyway create a circuit that can emulate
a lumped load.

Art,

This is baloney.

73's
Richard Clark, KB7QHC

Hmm again no input or facts


"Richard Clark" wrote in message
...
On Sun, 01 Feb 2004 21:17:20 GMT, " Art Unwin KB9MZ"
wrote:
Eznec cannot in anyway create a circuit that can emulate
a lumped load.

Art,

This is baloney.

73's
Richard Clark, KB7QHC

On Sun, 01 Feb 2004 23:17:56 GMT, " Art Unwin KB9MZ"
wrote:

Hmm again no input or facts

Hi Art,

Exactly.

73's
Richard Clark, KB7QHC

Nothing again just talk no walk

"Richard Clark" wrote in message
...
On Sun, 01 Feb 2004 20:36:18 GMT, " Art Unwin KB9MZ"
wrote:

Eznec cannot deal the way we want with lumped loads

Art,

This is baloney.

73's
Richard Clark, KB7QHC

On Sun, 01 Feb 2004 23:16:52 GMT, " Art Unwin KB9MZ"
wrote:
Nothing again just talk no walk

Art,

You think you could add anything instead of agreeing?

73's
Richard Clark, KB7QHC