Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
Richard Clark wrote:
I noticed you do not retract your statement but whine about analysis Tsk, Tsk Nothing to retract, Richard. The direction of AC current flow is merely a convention. In a balanced transmission line system, if the differential current is flowing toward the load in one wire, it is flowing away from the load in the other wire. Otherwise, it would be common-mode current. At certain times during the RF cycle, the forward current phasor and the reflected current phasor in one wire are both pointed toward the load. In the other wire, they are pointed toward the source. 1/2 cycle later, things are reversed. Draw a DC circuit with a battery and a load. In one wire, the load current is flowing toward the load. In the other wire, the load current is flowing away from the load toward the battery. So we reference the wire connected to the '+' battery terminal which is carrying the current toward the load and call the other wire a return path. But balanced AC has no such distinction. There is no positive terminal or negative terminal on the AC generator except by convention. Incidentally, Edison shared your confusion. Taking the RF generator as the reference, a freeze-frame snapshot of the RF current maximum points up and down a matched balanced transmission line may result in: ------------------------------------------ Source Load ------------------------------------------ -- 73, Cecil http://www.qsl.net/w5dxp -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
current/inductance discusion | Antenna | |||
A Subtle Detail of Reflection Coefficients (but important to know) | Antenna | |||
Eznec modeling loading coils? | Antenna |