Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
Richard Harrison wrote:
If any part of the simple dipole, 1/2-wave or shorter, is made of a coil instead of a straight piece of wire, the coil too has a higher impedance on the end nearer the dipole tip and a lower impedance on the coil end near the center of the dipole. Yep, and for the same power level, a higher impedance usually means a lower current and vice versa. -- 73, Cecil http://www.qsl.net/w5dxp -----= Posted via Newsfeeds.Com, Uncensored Usenet News =----- http://www.newsfeeds.com - The #1 Newsgroup Service in the World! -----== Over 100,000 Newsgroups - 19 Different Servers! =----- |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
current/inductance discusion | Antenna | |||
A Subtle Detail of Reflection Coefficients (but important to know) | Antenna | |||
Eznec modeling loading coils? | Antenna |