Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]() Cecil and Yuri have been uncharacteristically silent, at least about this thread since I started it. Frankly I expected some flak. Regards, Wes Howdy anteneers, I have been characteristically absent from the freezing NE, enjoying Bahama Mammas near Nassau, shaking off cold or flu, operating as C6AYB in CQ 160m contest (beat world Low Power world record) with IC706 and piece of wire in the form of Half Sloper from the balcony down to a palm tree and getting some badly needed tan for my sickly pale complexion. Sorry for missing some of the coil battles. As far as flak, I glanced over the mentioned paper and deducted that relates to some calculated "facts" rather than measured. So far I have concluded that we have reached point of (dis)agreement between two sides, and as I mentioned, there is not much point in arguing. W8JI tried to prove his "truth," only to measure differences in coil current (not showing details about the setup) and while insisting he is right, proving that he is wrong. As I mentioned, weather permitting, I will do more measurements, describe them in an article. In the mean time, if anyone else made the measurements, please describe them along with the description of setup (length of radiator parts, placements of coil, frequencies, etc.) Otherwise, you have to patient until I get around doing it, I have life and priorities outside of NG. I started reading Marc Seifer book "Wizard" - The life and times of Nikola Tesla, fascinating insight and chronology of this greatest engineering genius and the hurdles he had to overcome from the flat earth society. 73 Yuri, K3BU |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
current/inductance discusion | Antenna | |||
A Subtle Detail of Reflection Coefficients (but important to know) | Antenna | |||
Eznec modeling loading coils? | Antenna |