LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #7   Report Post  
Old January 31st 07, 05:07 AM posted to sci.electronics.design,alt.engineering.electrical,rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jan 2007
Posts: 8
Default Converting From mV/m To Decayed mW (ERP)

wrote:

On Jan 24, 2:45 pm, "mpm" wrote:
On Jan 23, 8:29?pm, "Kaimbridge" wrote:

What I'm interested in is converting a given field strength mV/m,
at a given distance for a particular frequency, to the equivalent
(decayed) baseline wattage.


If I understand what you're asking, your question really centers
around how to calculate Free Space Loss. The Friis Equation will
allow you to do this, and it is a relatively simple matter to
derive Free Space Path Loss in decibel form from the Friis Equation.


I'm not su Is this the same (or at least related to) W/m^2?
The problem I see with these is that, as distance approaches 0, KW
approahes oo and what I'm looking for shouldn't be greater than the
transmitter's erp.
What got me on this idea, is a few weeks go I was visiting up in the
NH White Mountains and was checking out the AM/FM bands (I'm a radio
geek! P=). When I got home, I went to the FCC site to create a
bandscan of the area. The designation used was the radius from a
point.
I quickly realized that this was less than ideal, as--using 100 km
radius, as an example--100 W stations at that distance would be listed
along with 50 and 100 KW! What would be much more useful would be a
listing of stations that provide--st least the theoretical baseline
value (i.e., not considering intervening local terrain or one's
receiver sensitivity and antenna gain)--a given mV/m or mW at that
point (thus listing 100 W stations out to 15 km, whereas 50 KW
stations out to 75 km and 100 KW to 130 km would be listed).
Think of it this way: If you turned on a 100 W lightbulb in the
middle of a field at night and held a book page right up to it, you
would be able to read it clearly; if you moved about 10 feet away
(with the book page still facing the lightblb, unobstructed), you
would have difficulty trying to read it, as only about the equivalent
of (e.g.) 50 mW of light may be hitting the page.

~Kaimbridge~

-----
Wikipedia-Contributor Home Page:

http://en.wikipedia.org/wiki/User:Kaimbridge

***** Void Where Permitted; Limit 0 Per Customer. *****


Unless i am more mistaken than usual, the basic reference distance for
radiated power is 1 meter from the phase center of the antenna. Of course
depending on wavelength / frequency this could mean sub-near field
measurements to normal (semi-far to far field) measurements.

--
JosephKK
Gegen dummheit kampfen die Gotter Selbst, vergebens.Â*Â*
--Schiller
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Converting sweep tube amp to 4cx250 amp Jimmie CB 12 January 27th 05 12:16 PM
Issues in converting rectifiers ?? William Mutch Boatanchors 14 January 19th 05 12:55 AM
Converting Primetime Files KA6UUP Shortwave 1 October 27th 04 03:56 PM
Converting Vectronics HFT 1500 to L network? denton Homebrew 1 July 20th 04 12:52 PM
converting a VHF micor for ham use john private smith General 3 December 19th 03 05:57 AM


All times are GMT +1. The time now is 06:23 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017