Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
On Thu, 01 Feb 2007 19:32:05 -1000, wrote:
signal reports on 80 have been very impressive. You sound like a very good customer prospect weighed against the testimonials offered to a German inventor of a 9 foot tall 160M radiator. Signal reports on 80 still doesn't make it work on 40M however. The reasons have been explained for your difficulties, and solutions offered. Are you looking for something different? 73's Richard Clark, KB7QHC |
#2
![]() |
|||
|
|||
![]()
Richard Clark wrote:
On Thu, 01 Feb 2007 19:32:05 -1000, wrote: signal reports on 80 have been very impressive. You sound like a very good customer prospect weighed against the testimonials offered to a German inventor of a 9 foot tall 160M radiator. Signal reports on 80 still doesn't make it work on 40M however. The reasons have been explained for your difficulties, and solutions offered. Are you looking for something different? 73's Richard Clark, KB7QHC Richard, I am not trying to be an ass here, but I was told BEFORE the antenna was built it would work on 40. So it got built and doesnt work on 40 as is. It was suggested at the time to use a 1/4 wave section of coax to get it to work on 40, which as you know it doesnt. All I want to do is figure out a way to get it to work on 40 now. Believe me this antenna works extremely well on 80. 20 over 9 reports from ZL when the VK's there are only 10 over 9. This configuration works well, I am sure someone could build a similar version just for 40 and be a big gun on 40. -- I SPILLED SPOT REMOVER ON MY DOG..............AND NOW HES GONE!! |
#3
![]() |
|||
|
|||
![]()
On Fri, 02 Feb 2007 05:59:56 -1000, wrote:
I was told BEFORE the antenna was built it would work on 40. You are a victim of poor information. That is evident in the false assurance (it simply doesn't make sense) and the positive proof of your measurements. So it got built and doesnt work on 40 as is. No one here is surprised by that outcome. It was suggested at the time to use a 1/4 wave section of coax to get it to work on 40, which as you know it doesnt. A quarter wave solution was offered by Owen which was the correct solution. This does not mean it would turn a dog into a performer, it simply meant it would match. Now, as to the matter of making it match using coax, THAT is a hash pipe dream. You may eventually succeed through luck and happenstance, but chances are that coax will glow at night. All I want to do is figure out a way to get it to work on 40 now. As I offered, Owen has already done the work, but only you can build it and discover it works. Believe me this antenna works extremely well on 80. 20 over 9 reports from ZL when the VK's there are only 10 over 9. That's nice, but it doesn't solve 40M. 73's Richard Clark, KB7QHC |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|