| Home |
| Search |
| Today's Posts |
|
#1
February 26th 07, 10:29 AM
posted to rec.radio.amateur.antenna
|
|||
|
|||
ICOM 706MKIIG & SGC SG-237 Smarttuner Cable Setup
Hello,
I am building the cable to hook up the 706MKIIG to the SG-237 smart tuner SGC's instructions for the 230 say to use a 1000uf Cap + a 91k resistor is this required for the SG-237 unit? or just the SG-230? SGC's Documentation Below! http://www.sgcworld.com/smartuneric706technote.html http://www.sgcworld.com/Publications...connecting.pdf |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Outdoor Scanner Antenna | Scanner | |||
| The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Antenna | |||
| Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
| Mobile Icom 706MKIIg shielding problem ? | Equipment | |||
| Mobile Icom 706MKIIg shielding problem ? | Equipment | |||
Threaded Mode
