Home |
Search |
Today's Posts |
#3
![]() |
|||
|
|||
![]()
Yuri Blanarovich wrote:
"Ceriel Nosforit" wrote: My receiver is an Icom-R5 handheld scanner, 0.150 to 1300MHz continuous. You could have some rectification and creation of intermods going on at some bad, corroded junction. Check the connections. That front end is so broad-banded that there is probably no corrosion needed to generate intermod. I had an ICOM 2m handheld that was useless in downtown Phoenix while mobile on a dual band mobile antenna. I suspect a notch filter would be the way to go to reduce the intermod while keeping full functionality of the Beverage. -- 73, Cecil http://www.w5dxp.com |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Safety ground versus RF ground for a 2nd Floor shack | Antenna | |||
Transforming your simple Ground Rod into a Ground Anchor : Is It Worth The Work ? - You Decide ! | Shortwave | |||
Ground Or Not To Ground Receiving Antenna In Storm ? | Antenna | |||
Shipping: UPS Ground vs. FedEx Ground | Equipment | |||
Shipping: UPS Ground vs. FedEx Ground | Swap |