Cecil Moore wrote:
All of the energy incident upon point '+' from both
directions, |a1|^2 + |a2|^2, is directed toward the
load by the interference patterns at the Z0-match
point '+'. We hams commonly refer to that condition
as being 100% re-reflected.

The above is true in the special case of a Z0-match.
In general, |a1|^2 + |a2|^2 = |b1|^2 + |b2|^2
and since |b1|^2 = 0, the above expression is
correct.

*Quoting from HP Ap Note 95-1*:

|a1|^2 = Power incident on the input of the network
(i.e. Forward power on the 50 ohm line)

|a2|^2 = Power reflected from the load
(i.e. Reflected power on the 300 ohm line)

|b1|^2 = Power reflected from the input port of the network
(i.e. Reflected power on the 50 ohm line)

|b2|^2 = Power incident on the load
(i.e. Forward power on the 300 ohm line)

end quote from HP Ap Note 95-1
--
73, Cecil http://www.w5dxp.com