Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
On 18 Apr, 15:11, "Andre & Sharon Walker"
wrote: Wow..looks like I opened a can of worms here! Thanks to all for the many links and advice..much food for thought. I think ill have to re assess I was considering end fed longwire also, but an inverted V might be a better option. Anyway, should be on the air within 4 weeks...the licence is the easy bit, diverting funds for the radio from the XYL is the tricky part!!! But ive been offered a FT101z , inc Yaseu Desk mix + spare set of finals ( is too early to rember the number of the tubes off hand...just finished night shift), so ill have wind the wick WAY back to start with. I don't care what they say at the club...I like boat anchors!! ( I'd love to replace the Murphy B40 I sold 10 years ago :-( ) Cheers Andre"Owen Duffy" wrote in message ... Cecil Moore wrote in t: Andre & Sharon Walker wrote: I was hoping to get away from traps, but i dont think its possible :-(. I only have a smallish yard, with just 30m from the chimmny (brick ) to the back of the yard, so i think a decent wire antenna is out...but i am open to suggestions. I guess the other considerstion is to keep "she inside" happy . A 1/2WL dipole is 20m on 40m and can be made to work on all HF bands 40m-10m. That's probably what I would do and then do something romantic to keep the XYL happy. Cecil, Andre will not have access to most HF bands, just 80, 40, 15, and 10m. It takes about 6 hours to train and assess a Foundation Licencee, so your tunerless concept is perhaps more complex than Andre's current knowledge base. For example, I worked a FL chap a couple of days ago on 40m with a 80m half wave dipole fed with a long run of coax, and he was confident that his antenna worked real well, despite my expectation that it was likely that well less than 10% of his permitted 10W PEP was radiated. It was impossible to tell this chap that if he cut the dipole to half the length it would work better on 40m. It is no good telling people that an antenna isn't likely to work real good, they will cite all the contacts that they have had with it, and as we know, anything "works", doesn't it. However, most people listen to the positive suggestion that with change, and antenna will work better (and in the above case, more than 10 times the EIRP). Andre, keep it simple. A coax fed half wave dipole is easy to get going will limited knowledge and experience, and you should have a high confidence that you will be able to deliver a suitable load to your transmitter (ie it will deliver its rated power), and the antenna will be quite efficient (ie that most of your 10W PEP transmitter power is radiated). It will also work well on receive. If you hear strong FL signals around, they have good antennas, and / or are flaunting the power limit. It is easy to do the latter, but if you get the antenna right, you still have the room for improvement when you upgrade to the higher power limit. Owen- Hide quoted text - - Show quoted text - Andre you did indeed open a can of worms!, A vertical antenna is the most complicated thing in the world that even a newsgroup full of antenna experts are having difficulty in solving. It is quite possible that this thread will top a hundred replies before you arrive at the right question that they can answer. Cheers and beers Art |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Multiband Wermager | Antenna | |||
The Long and Thin Vertical Loop Antenna. [ The Non-Resonance Vertical with a Difference ] | Shortwave | |||
using 450 ohm twin lead to feed 43 ft multiband groundmounted vertical | Antenna | |||
1/4 wave vertical vs. loaded vertical | Antenna | |||
ADVICE: Lookng for an economical portable multiband HF Vertical | Antenna |