I'd considered that, but since the surface was white to begin with, I'd
guessed the designers had considered it to be an insignificant issue.
The LNB is going to be cooled to maintain a stable temperature, but
maybe I need to pull out the spray gun.

--
Book


9A4DE wrote:

My question is, would polishing the surface (after a good clean) with
ordinarily car polish be likely to cause any problems. I'd rather not
have to re-spray the thing.


Dont do this! 3m polished dish + solar heat = melted feed. Paint it with
matte gray paint and even then be careful and dont point it in the sun.

GL de 9A4DE


Thanks,
--
Book