Home |
Search |
Today's Posts |
#2
![]() |
|||
|
|||
![]()
On Thu, 10 May 2007 23:35:41 -0400, "Bob D."
wrote: I like the idea of the window feed through. In case of a lightning storm, one could easily disconnect his antennas from the INSIDE. My question is should one ground the feed-through plate at the window to a ground rod just below the window? Hi Bob, Only if you want the lightning to go there. First thought - Maybe this would help protect the house. Too many variables unmentioned to guarantee that. Second though - Maybe it would be better to let the coax float with the tower, to avoid burning out the coax. Think of it as a fuse. Do you want it to blow open, or continue feeding a bajillion amps into the ground nearby? (Again, neither of these is guaranteed to occur - too much left unsaid.) This could elevate the local ground potential and if you take too long a stride you could feel half that potential between your legs (does that motivate you?). This is implicit to the next thought: Third thought - With ground rods at both the tower and the entrance to the house, could this create a noise inducing ground loop? Connect the two (and beyond) per standard practices. Is there any standard practice about this? Consult your local library for the code. Such things vary from place to place, but there are commonalities - no doubt many of them will be discussed here shortly. 73's Richard Clark, KB7QHC |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
How get RF through a sealed window? | Antenna | |||
How get RF through a sealed window? | Homebrew | |||
Help: Carolina Window 80 | Antenna | |||
A Window into RHF | Shortwave | |||
A window into MWB and another window into RHF and another... | Shortwave |