Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old May 17th 07, 01:48 AM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: May 2007
Posts: 2
Default Unusual Old Phelps Dodge (or A/S, maybe) 5/8-wave High- band VHF Whip

In the 1970s-'80s, Phelps Dodge (and/or maybe) Antenna Specialists
manufactured
a 5/8-wave high-band VHF whip that differed from the usual design.

Rather than incorporating the typical base-loaded match in a
waterproof housing, the radiator itself was formed into a coil of
about two turns with an approximate 2.5 inch diameter.

Thus, the match also served as a spring.

I am looking for one of these, new or used.

K1JJJ.ae@ verizon.net

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cellwave/Phelps Dodge antennas FS/or trade Will Antenna 0 June 12th 06 01:06 AM
Cellwave/Phelps Dodge antennas Will Swap 0 June 12th 06 01:04 AM
FA Coax hardline 50 ohm RF connectors Phelps Dodge  Tom Swap 0 May 5th 06 04:08 PM
tnom's 1/4-wave whip design parameters Frank Gilliland CB 8 January 28th 06 04:07 PM
WTB Really Skinny Whip Material for 1/4 wave two meter Tom M Antenna 2 November 1st 04 11:14 PM


All times are GMT +1. The time now is 07:05 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017