"NotMe" wrote in message
. ..
I need some help me with a decision on which coax to purchase. I'm a new
General Class ham and am planning my HF setup.

The standard coax seems to be RG-8. I'm curious if I use Belden RG-8X
(9258), will there be that much difference in performance at about 100' of
coax as compared to using RG-8? I want to use the RG-8X because the
smaller diameter coax will allow me to feed the coax easier into my house.
I suppose I could try to get the RG-8 in the house, but the place where I
want to bring it in only has minimal space and the RG-8X will fit just
right.

Thanks.
IF you are in a marine environment or where the coax would be subject to
abuse --- consider the # 117 -- RG-8X from The Wireman.
Press recommended this cable to me about 20 years ago -- it is all I use for
portable and home usage -- one tough cable -- easy to solder PL-259 to as
well due to the polypropylene dielectric!
http://thewireman.com/coax.html

w9gb

CQ MINI 8
Marine-Mobile First with a tough 'walk-on' polypropylene dielectric
and tinned copper shield and tinned stranded center conductor, and now with
a tough, long lived, scuff resistant, jacket. #117