Home |
Search |
Today's Posts |
#7
![]() |
|||
|
|||
![]()
Mike Kaliski wrote:
wrote in message ... Mike Kaliski wrote: "Rick (W-A-one-R-K-T)" wrote in message news ![]() OK, per the thread on "Question on grounding rods", I'm supposed to use 8-foot grounding rods rather than twice as many 4-foot rods. I can see that. But, we're built on a ledge, one big wide rock that stretches from the seacoast to the Vermont state line (that's why they call New Hampshire the "Granite State"). I can get three feet depth at best before running into solid rock. An electrician friend of mine says I can drive the ground rod in at a 45-degree angle, but that would still run an 8-foot ground rod to a depth of more than 5.5 feet below the surface. Can't be done. So, what do I do next? Rick Check out some new builds in the area and see what earthing arrangements are being put in there. The new properties will obviously have to conform with the latest regulations. If the builders have to use a specially long drill rig, you might be able to bribe them to come and drill you a few new holes. Failing that, its welding a long tube onto whatever you have that will drill through granite and then spending a couple of days drilling downwards. Radio hams are supposed to be renowned for their ingenuity and determination when faced with tricky situations. Build an echosounder or ground resistivity meter and scour the plot looking for a crack you can drive rods down through? The possibilities for experimentation are endless. What purpose would be served by putting a grounding rod in solid rock? All codes/regs I've seen have alternatives for special situations like this, such as buried plates or several horizontal, interconnected, buried rods. -- Jim Pennino Remove .spam.sux to reply. Jim Yes, you're absolutely right. I was just thinking about how to punch down through 8 feet of rock rather than the end purpose. Ground radials, plates or earth mats buried as well as possible in the soil make a lot more sense. Mike G0ULI There are other conciderations as well such as is this an electrical ground to meet some code, a lightning protection ground to keep your insurance in force, or an RF ground to make your antenna work? -- Jim Pennino Remove .spam.sux to reply. |
Thread Tools | Search this Thread |
Display Modes | |
|
|