| Home |
| Search |
| Today's Posts |
|
#14
July 15th 07, 09:07 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
Using a copper water pipe in place of a ground rod?
I doubt that there would be any real difference to start with. The pipes
are thin enough they would be hard to drive in the ground and after a while they would rust out sooner. ================================================== Copper ....rusting ? ........... must be veeeery acidic soil .....perhaps in the backyard of a chemical plant ? Frank GM0CSZ / KN6WH |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Building a Solid Copper Ground Pipe {Tube} with an Solid Iron Core. - Also - Water Drilling a Solid Copper Pipe for a Ground Rod. | Shortwave | |||
| Building a Solid Copper Ground Pipe {Tube} with an Solid IronC... | Shortwave | |||
| Cold Water Pipe Ground? | Antenna | |||
| Ground rod or water pipe? | Antenna | |||
| Antenna Tuner/Coupler Ground ... Hot Water Pipe? | Antenna | |||
Threaded Mode
