LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #14   Report Post  
Old July 25th 07, 06:25 PM posted to rec.radio.amateur.antenna,alt.tv.tech.hdtv
external usenet poster
 
First recorded activity by RadioBanter: Apr 2007
Posts: 20
Default Antenna combiner/joiner question

On Jul 25, 12:32 am, G-squared wrote:
On Jul 24, 7:50 pm, wrote:



In alt.tv.tech.hdtv szilagyic wrote:


| This makes sense, but does this apply for antennas that are pointed in
| opposite directions? I just want to clarify, you are basically saying
| to alter the cable length by say, a portion of a wavelength (a half of
| a wavelength?), for one of our favorite channels that is having issues?


No antenna perfectly eliminates the back lobe. Some just do better than
others (like a solid parabolic dish). The bow tie antenns will receive
some signal in the reverse direction. If that back lobe reception on one
combines out of phase with the front lobe of the other, it will reduce
the total sign somewhat.


--
|---------------------------------------/----------------------------------*|
| Phil Howard KA9WGN (ka9wgn.ham.org) / Do not send to the address below |
| first name lower case at ipal.net / |
|------------------------------------/-------------------------------------*|


Would some of these 'jointennas" reduce the interference /
interaction? They're not cheap but as much a s a cable bill.

http://www.warrenelectronics.com/ant...Jointennas.htm

Did I miss it or did nobody ask what the actual channels in question
are? Any idea of the relative signal strengths? How far away? I would
think if the antennas are "spectally separated" via diplexers, the
cable lengths woun't be all that critical. It also depends on how far
apart the channel frequencies are. If you have a 28 and 30 in front
and are trying to get a 29 from the back, that will be tough but if
it's several channel numbers apart, it is less tough. SO, what are the
channels in question?

GG


GG,

I came across those Jointennas and they look very interesting.
Unfortunately the channels (frequencies) we are trying to get are all
spread out. Here's a list anyway:

On the first antenna (VHF/UHF/FM) we get channels
2,4,7,9,20,28,50,56,62 (analog), and 14,21,41,43,44,45,52,58
(digital).

On the second antenna (UHF only) we get channels 18,23,47,53 (analog),
and 34,38,51,57,59 (digital).

Just out of curiousity, what is the average loss in dB when using the
Jointennas, or does it vary? I haven't been able to find any info on
the loss.

Thank you very much. There have been some great ideas posted in this
thread and we will try various things hopefully soon and see what
works.
--
Chris

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
What is a duplexer, diplexer and combiner? crb Antenna 4 December 8th 05 04:11 PM
wilkinson power combiner James Bond Homebrew 3 November 25th 04 03:39 AM
WANT: Radiomaster AC-108 antenna combiner phoneguy99 Swap 0 August 16th 04 05:10 AM
toroid combiner? outbander CB 5 September 24th 03 02:53 AM
Active antenna combiner (transmit & receive), 30-87 MHz Stefan Moscibroda Antenna 0 August 24th 03 08:52 PM


All times are GMT +1. The time now is 07:46 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017