Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]() Quads also have all the advantages that loops enjoy over dipoles. One thing that comes to mind is a marked reduction in static electricity due to wind and snow because the entire loop is virtually at DC ground. -- 73, Cecil http://www.qsl.net/w5dxp That's what I thought too, I built the quads using insulated wire in hope to eliminate atmospheric static, but I could barely tell the difference. What made huge difference (wiping out static completely) is the use of stacked antennas, or having larger antenna over the one in use. The top one would be 20 over S9 while lower one is dead silent. Quad advantages: made of wire, no corroded junctions like with Al tubing. Quads rule up to about 5 el. then Yagis take over. I have 3 el. design that is 50 ohms, no matching, broad band. One advantage quad has that it is only antenna that can be used for different polarizations with the same hardware. Parasitic loop doesn't know what polarization it is. Yuri, K3BU.us |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
HY-Gain 20 meter yagi | Antenna | |||
Compact Yagi Design for VHF????????????????????????? | Antenna | |||
Mechanically rotating your yagi to change polarization | Antenna | |||
Matching 70 cm Yagi to coax feedline | Antenna | |||
6m Yagi | Antenna |