Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]() "Cecil Moore" wrote in message ... John Doe wrote: Could I use the whip configuration as the center load coil, and just add some more wire to the top end of the whip and more wire to the bottom end?? Using more wire would make for a more efficient antenna but you would need to short out some turns on the 160m coil which causes a lowering of the coil Q. Ideally, you would just use (wind) a lower inductance coil, one with the exact amount of inductance needed. With a large top hat and more vertical wire, the size of the coil is considerably lessened. But shorting out the unneeded turns on a coil is a time honored tradition. -- 73, Cecil http://www.w5dxp.com 1 more question - Instead of using either the fixed 160m stick w/whip (stinger), or the 30 - 40 ft of wire, what do you think about using a Screwdriver Antenna at the top of the tree and running either a counterpoise or radials?? 73's |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
LQQking for AMP | CB | |||
LQQKing For Some Info | Antenna | |||
LQQKING FOR SOME INFO | Equipment | |||
LQQKING: JB-12 MODULATOR | Swap | |||
LQQKing for article | Antenna |