Trying to phase two antennas that close together at that frequency range
will be an educational experience at best, but more likely just an
exercise in frustration unless you have much more patience than average.
Such an array will be hyper-sensitive to everything. You might be able
to fleetingly see a null after a lot of tweaking, but I seriously doubt
you'll even get that. A tiny change in frequency, wiggling of the whips,
or even movement in the vicinity of the whips will have a profound
effect on any null you might see.

If a null from a small antenna is what you want, you'd have much better
luck with a carefully constructed and balanced ("shielded") loop.

Roy Lewallen, W7EL