| Home |
| Search |
| Today's Posts |
|
#4
October 11th 07, 07:14 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
Low Noise Receiving antennas
Tony Giacometti wrote:
I am confused..............are you suggesting I use a T2FD for a noise sensing antenna to be used with my ANC-4? Or should I take down my vertical transmitting antenna and replace it with a T2FD? Neither. I was suggesting (and obviously not very well) that you use it as a receiving antenna. It's very low noise. It makes a good transmitting antenna too, but you need to have a big enough balun and termination resistor to handle the power. Geoff. -- Geoffrey S. Mendelson, Jerusalem, Israel N3OWJ/4X1GM IL Voice: (07)-7424-1667 U.S. Voice: 1-215-821-1838 Visit my 'blog at http://geoffstechno.livejournal.com/ |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Noise Reducing Antennas | Shortwave | |||
| Transformer for longwire antennas to reduce noise problem? | Antenna | |||
| Transformer for longwire antennas to reduce noise problem? | Shortwave | |||
| Transformer for longwire antennas to reduce noise problem? | Shortwave | |||
| New Program. Receiving only antennas + Unun. | Antenna | |||
Threaded Mode
