Home |
Search |
Today's Posts |
#5
![]() |
|||
|
|||
![]()
Russ,
I have used both Landwehr and ARR preamps for 2 meter SSB. One of the major issues is how much coax, and what quality, you have. Another is the quality of the preamp which you have in your rig. In my case, I have about 70' of very low loss coax, almost hard line in performance. The preamp in my rig is fairly good, and the result is that there is little difference in performance, though there is a slight nod to the mast mounted unit. Lossy coax would definitely tip the choice to the mast mount. And in fact, on 70 cms with equivalent components, the mast mount is the clear winner. Beware of units which don't give you noise figures, as that is normally much more important for weak signal work than gain. -- Alan WA4SCA |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
TE System 6 meter amp w/preamp. | Swap | |||
2 meter preamp | Swap | |||
2 Meter Preamp for SSB use | Homebrew | |||
WANT D 104 UG8 PREAMP MIC | Swap | |||
FA: Non-working Vangard 10 meter preamp | Swap |