Home |
Search |
Today's Posts |
#7
![]() |
|||
|
|||
![]()
On Oct 23, 2:33 am, Helmut Wabnig hwabnig@ .- --- -. DOT .- t wrote:
On Tue, 23 Oct 2007 03:20:50 GMT, "998cc" wrote: I am looking for ways to improve my receive for 2-meter SSB weak signal work. I am running an Icom 706 MkIIG and a M2 5WL yagi. I understand mast mounted preamps bring the signal up significantly. Doe any one here use one for 2M SSB? What are your experiences? Thanks Russ Am just today experimenting with satellie in-line amplifiers, the variety for home sat reception, cheap, small. Some range from 100 MHz to 2,4 GHz, some have limiting filters on the input which you can easily remove or modify. Works. w. I used one of these "bullet" preamps once upon a time and the the improvement in reception was amazing, too amazing.This was a give away clue that my coax was bad. When I cut the bottom end off about a cup of water came out of it Jimmie |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
TE System 6 meter amp w/preamp. | Swap | |||
2 meter preamp | Swap | |||
2 Meter Preamp for SSB use | Homebrew | |||
WANT D 104 UG8 PREAMP MIC | Swap | |||
FA: Non-working Vangard 10 meter preamp | Swap |