Home |
Search |
Today's Posts |
#7
![]() |
|||
|
|||
![]()
Dave wrote:
what does the voltage read when it is turned on? an rs-20a is probably not so old that caps would go bad, and the low voltage left over when you turn it off probably means the caps are holding a charge. Or if anything is externally connected to the power supply, the left over low voltage can be coming from that connected device. I have my RS-20 connected to a deep discharge marine battery. If I forget to disconnect the battery from the power supply when I power down the supply, the meter on the supply displays the battery voltage. I'm told that can damage the regulator within the supply but that has never happened to me. -- 73, Cecil http://www.w5dxp.com |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Power Supply Question | Equipment | |||
13.8 V power supply question | Homebrew | |||
Anyone help. Power supply question. | General | |||
Anyone help. Power supply question. | Shortwave | |||
TX- Power Supply Cap Question | Boatanchors |