Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]() "Jerry Martes" wrote in message news:m4qZi.419$763.177@trnddc07... I missed being able to be clear in my "other" post. If there is a Beacon signal available from a POE satellite at 2meters there is an Excellent 2Meter source of signal with which a person can use to Very Accurately record the radiation pattern from horizon to horizon at all azimuth angles. That radiation pattern will be the pattern of the Ground antenna, not the satellite antenna. We have to assume the satellite radiates equal in all directions. The strength of the received signal is recorded into some program like Excel as a function of time. The actual Az-El to the satellite is published, or can be computed. So, it becomes fairly easy to record the actual (ground based) antenna's radiation pattern which includes all the environmental effects like trees and neighbors's houses. Jerry KD6JDJ Jerry you were clear to me. There are several things wrong trying to use the sat to determine the patern of the antenna on the ground at other than the specific pass. Low orbiting sats will start at a great distance as they come over the horizon and get to with in a few hundred miles as they go over head. The squnit angle of the sat antenna will change so the sat antenna is not always pointing at the ground antenna. The apparent polarity will change and that can make a big differance. I have the KLM circular beam pair for 2 meters and 435 mhz on an az/el setup and computer control. Also can switch from left to right circular and have monitored the sats go over and sometimes have to switch left to right as they pass for the best signal. I have not tried it on a sat but for the Icoms ( it might work on others) there is a program that will record the s-meter and draw a plot on the screen . I have done it looking at repeaters and it does seem to work ok for drawing paterns. |
#2
![]() |
|||
|
|||
![]() "Ralph Mowery" wrote in message ... "Jerry Martes" wrote in message news:m4qZi.419$763.177@trnddc07... I missed being able to be clear in my "other" post. If there is a Beacon signal available from a POE satellite at 2meters there is an Excellent 2Meter source of signal with which a person can use to Very Accurately record the radiation pattern from horizon to horizon at all azimuth angles. That radiation pattern will be the pattern of the Ground antenna, not the satellite antenna. We have to assume the satellite radiates equal in all directions. The strength of the received signal is recorded into some program like Excel as a function of time. The actual Az-El to the satellite is published, or can be computed. So, it becomes fairly easy to record the actual (ground based) antenna's radiation pattern which includes all the environmental effects like trees and neighbors's houses. Jerry KD6JDJ Jerry you were clear to me. There are several things wrong trying to use the sat to determine the patern of the antenna on the ground at other than the specific pass. Low orbiting sats will start at a great distance as they come over the horizon and get to with in a few hundred miles as they go over head. The squnit angle of the sat antenna will change so the sat antenna is not always pointing at the ground antenna. The apparent polarity will change and that can make a big differance. I have the KLM circular beam pair for 2 meters and 435 mhz on an az/el setup and computer control. Also can switch from left to right circular and have monitored the sats go over and sometimes have to switch left to right as they pass for the best signal. I have not tried it on a sat but for the Icoms ( it might work on others) there is a program that will record the s-meter and draw a plot on the screen . I have done it looking at repeaters and it does seem to work ok for drawing paterns. Hi Ralph Although I disagree with your premise about "great distance and a few hundred miles", I must admit that I lack knowledge of the satellites other than the few NOAA satellites. The NOAA satellites are about 4 time more distant at the horizon than overhead. That results about 12 dB less signal at the low elevation angle. The 12 dB is fairly easy to put back in the plot. The guys at NASA/NOAA did an excellent job of tailoring the NOAA satellite pattern shape so it is close to equal over the entire pass. I'd have expected the "OSCAR" guys to have done the same and shaped their satellite antenna beams to be essentially equal level over the angle at which the Earth intercepts the satellite beam. I'd like to know more about a 2Meter beacon satellite. Can you point me to a site where I can learn about 2Meter beacon satellites? I have a friend who will write me a program to plot signal strength as a function of angle on a polar plot. He made me one for the NOAA (137 MHz) satellites. I like modeling antennas at 2Meters and have an Icom PCR1000 that I'd like to get some use out of. Jerry KD6JDJ |
#3
![]() |
|||
|
|||
![]() "Jerry Martes" wrote in message news:%dsZi.2897$CI1.289@trnddc03... Although I disagree with your premise about "great distance and a few hundred miles", I must admit that I lack knowledge of the satellites other than the few NOAA satellites. The NOAA satellites are about 4 time more distant at the horizon than overhead. That results about 12 dB less signal at the low elevation angle. The 12 dB is fairly easy to put back in the plot. The guys at NASA/NOAA did an excellent job of tailoring the NOAA satellite pattern shape so it is close to equal over the entire pass. I'd have expected the "OSCAR" guys to have done the same and shaped their satellite antenna beams to be essentially equal level over the angle at which the Earth intercepts the satellite beam. I'd like to know more about a 2Meter beacon satellite. Can you point me to a site where I can learn about 2Meter beacon satellites? I have a Jerry you can find information on the ham sats at www.amsat.org. I guess the great distances I was thinking about was from about 200 miles to around 1000 or so. As you said that is getting close to 10 to 12 db differant. In one way that is not really that much differance in signal, but the types of antennas we have been talking about would have from 0 db to about 6 db of gain. Most would have just one or two db worth of differance in the best direction. |
#4
![]() |
|||
|
|||
![]() "Ralph Mowery" wrote in message ... "Jerry Martes" wrote in message news:%dsZi.2897$CI1.289@trnddc03... Although I disagree with your premise about "great distance and a few hundred miles", I must admit that I lack knowledge of the satellites other than the few NOAA satellites. The NOAA satellites are about 4 time more distant at the horizon than overhead. That results about 12 dB less signal at the low elevation angle. The 12 dB is fairly easy to put back in the plot. The guys at NASA/NOAA did an excellent job of tailoring the NOAA satellite pattern shape so it is close to equal over the entire pass. I'd have expected the "OSCAR" guys to have done the same and shaped their satellite antenna beams to be essentially equal level over the angle at which the Earth intercepts the satellite beam. I'd like to know more about a 2Meter beacon satellite. Can you point me to a site where I can learn about 2Meter beacon satellites? I have a Jerry you can find information on the ham sats at www.amsat.org. I guess the great distances I was thinking about was from about 200 miles to around 1000 or so. As you said that is getting close to 10 to 12 db differant. In one way that is not really that much differance in signal, but the types of antennas we have been talking about would have from 0 db to about 6 db of gain. Most would have just one or two db worth of differance in the best direction. Hi Ralph I would sincerely like to know where to find that 2Meter beacon from a satellite. I have searched a little. Since you have knowledge of the satellite with the 2Meter beacon, I'd appreciate any link to it. I have some AMSAT journals but I havent recognized which satellite transmits that 2 Meter beacon. Your posts show clearly that you question the accuracy of the radiation pattern measurement of an antenna when the satellite is used for the illuminator. I submit to you that you wont find a better way to record the actual radiation pattern. I can measure an antenna's pattern with close to 20 dB dynamic range. It is unclear to me why you doubt the accuracy of patterns I record. One of the benefits of using 137 MHz is the ease with which a person is able to find programs that tell the exact location (Az - El) to the satellite. You can se an example of the radiation pattern at Patrik Tast's site http://www.poes-weather.com/. The pattern is in the section "antennas". I sure will appreciate any information you can give me related to 2Meter beacon satellites. I'm trying to make a program (free) that amateurs can use to record 2Meter antenna radiation patterns. I am very pleased with the program Patrik made for me using the 137 MHz satellites. Thanks for your help Jerry |
#5
![]() |
|||
|
|||
![]() "Jerry Martes" wrote in message news:rDGZi.171$RR1.12@trnddc02... entire pass. I'd have expected the "OSCAR" guys to have done the same and shaped their satellite antenna beams to be essentially equal level over the angle at which the Earth intercepts the satellite beam. I'd like to know more about a 2Meter beacon satellite. Can you point me to a site where I can learn about 2Meter beacon satellites? I have a Most of the ham sats are simple as far as that can be. The antennas on them are not really made to point that accurate. Here are some sats that have beacons near 145 mhz. http://www.amsat.org/amsat-new/satel...tes/status.php |
#6
![]() |
|||
|
|||
![]() "Ralph Mowery" wrote in message ... "Jerry Martes" wrote in message news:rDGZi.171$RR1.12@trnddc02... entire pass. I'd have expected the "OSCAR" guys to have done the same and shaped their satellite antenna beams to be essentially equal level over the angle at which the Earth intercepts the satellite beam. I'd like to know more about a 2Meter beacon satellite. Can you point me to a site where I can learn about 2Meter beacon satellites? I have a Most of the ham sats are simple as far as that can be. The antennas on them are not really made to point that accurate. Here are some sats that have beacons near 145 mhz. http://www.amsat.org/amsat-new/satel...tes/status.php Thanks Ralph I found the staellite and will set up my receiver to learn more about that 2Meter beacon from VO-52. I sure appreciate your help. Jerry |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
FM RDS questions. | Broadcasting | |||
FM RDS questions. | Broadcasting | |||
More R-4b questions | Boatanchors | |||
Ham-Key Questions | General | |||
BEWARE SPENDING TIME ANSWERING QUESTIONS HERE (WAS Electronic Questions) | Antenna |