Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
On 4 Dec, 23:34, Roy Lewallen wrote:
AI4QJ wrote: Roy, I will definitely be going through those archives. However, we have seen many antennas in which the entire antenna is wound as a spiral with a relatively large pitch in order to shorten it. In this case, the entire antenna could also be considered an "inductor". For that matter, even a straight length of antenna wire could be considered a 1/2 turn "inductor". Ignoring the latter extreme example for now, could not the common spirally wound antenna be considered an inductor that "replaces" the entire antenna? I'm not saying it is a "good" antenna but it could be 90 degrees long and have the same distribution of standing wave current as a straight antenna. Also, I wonder if we are arguing semantics over the definition of "inductor". Definition is definitely a part of the problem. I don't have so much trouble with variations of defining an "inductor" as I do with the concept of "replacing" part of an antenna or measuring an inductor in "electrical degrees". A straight wire and a coiled wire both have the property of inductance, but in general a coiled wire will radiate less than a straight one of the same inductance. The coupling to ground or the other half of the antenna is also different for straight and coiled wires. So one doesn't directly "replace" the other. Where on earth did this little gem come from? W8ti states a similar thing when he says a wire should be as straight as possible . I suspect that some conditions and definitions are to be added before such a generalized statement can be made. Seems like the beginning of an old wives tale that can produce a thread by Cecil that could last a decade before it is finally snuffed out unless the statement is securely bound by a definition where there can be no misunderstanding especially by those well versed in relatavistic sciences.Let's face it radiation can be generated from a point source which can be seen as three dimensional where as a straight wire is two dimensional Art KB9MZ The concept of "replacement" is overly simplistic and, when extrapolated, can lead to erroneous conclusions (or in the case of Cecil's and Yuri's theories, multiple and contradictory conclusions). Take a look at my 2005 measurements and see if you can do what Cecil and Yuri failed to do coherently -- use the "replacement" concept and explain where the missing degrees went. Roy Lewallen, W7EL |
Thread Tools | Search this Thread |
Display Modes | |
|
|