| Home |
| Search |
| Today's Posts |
|
|
|
#1
December 6th 07, 06:27 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
Loading Coils; was : Vincent antenna
Richard Clark wrote:
What was used as the phase reference? Channel 1 was used for the phase reference for Channel 2. The time-phase difference between the two signals at zero-crossing was the the delay through the coil measured using traveling-wave current. -- 73, Cecil http://www.w5dxp.com |
|
#2
December 6th 07, 06:46 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
|
Loading Coils; was : Vincent antenna
On Thu, 06 Dec 2007 18:27:06 GMT, Cecil Moore
wrote: Richard Clark wrote: What was used as the phase reference? Channel 1 was used for the phase reference for What was the load for Channel 1 input? 73's Richard Clark, KB7QHC |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
![Cecil Moore[_2_] is offline](https://www.radiobanter.com/images/SultanThemeVB3R/statusicon/user_offline.gif)
Hybrid Mode
