Home |
Search |
Today's Posts |
#3
![]() |
|||
|
|||
![]()
The trap dipole works good on all bands but 80 meters.
We have so much noise it is just about worthless. We have tried turning off as much equipment as possible in the weather station with no success. So - there is something that is causing the problem - but - whatever it is we can not shut it down. Any suggestions for a good in line RF filter for 80 meters that may help eliminate noise? Open to any all suggestions from homebrew to a good reliable manufactured filter. Any and all suggestions would be appreciated. Sam - K7SAM WX7GGW - Skywarn First, I would check that antenna against a plain ol' dipole to make sure its not the antenna. (Or use a portable AM radio to check for local noise.) If the plain dipole exhibits a noiseless reception, then throw out the trap dipole. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Software DSP audio filter programs versus hardware audio filter DSP units | Shortwave | |||
FS: CW Filter | Boatanchors | |||
CW filter/notch filter | Homebrew | |||
WTB Ten Tec 282 Filter | Equipment | |||
FS: Ten Tec 285 filter | Swap |