| Home |
| Search |
| Today's Posts |
|
#18
February 3rd 08, 04:25 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
70cm reflectometer?
Richard Clark wrote:
One source of error in the VHF/UHF region was that the rubber gasket inside the N connector (and for that matter, for any N connector) will accumulate thread debris. It should be used as a visual correlative to the amount of similar debris bridging the Teflon insulator. This debris can whack out these meters and degrade connections. 73's Richard Clark, KB7QHC Oops, Jeff Goldblum was "New Jersey". tom K0TAR |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 6M/2M/70CM FM Rig | Equipment | |||
| building a cepstrum reflectometer | Antenna | |||
| Reflectometer measurements | Antenna | |||
| FS: Collins Mechanical Filter, Waters Reflectometer and More | Boatanchors | |||
| FS: Cesco Reflectometer | Swap | |||
![Tom Ring[_2_] is offline](https://www.radiobanter.com/images/SultanThemeVB3R/statusicon/user_offline.gif)
Threaded Mode
