Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old July 27th 03, 11:43 PM
Peter Wilson
 
Posts: n/a
Default Will my G5RV work in a this V shape

Hi I wish to hook up my G5RV so that the centre is on my mast and the legs
go one to my chimney, and the other to my neighbours chimney. the mast from
both chimney's is about 55 feet. the two chimneys are about 50 apart. It
will form a V with the feeder at the mast. Will it work or is the angle to
tight

Thanks in anticipation

Peter


  #2   Report Post  
Old July 28th 03, 05:29 AM
Roy Lewallen
 
Posts: n/a
Default

Egad, how big of a job could it be to put it up and try it?

Roy Lewallen, W7EL

Peter Wilson wrote:
Hi I wish to hook up my G5RV so that the centre is on my mast and the legs
go one to my chimney, and the other to my neighbours chimney. the mast from
both chimney's is about 55 feet. the two chimneys are about 50 apart. It
will form a V with the feeder at the mast. Will it work or is the angle to
tight

Thanks in anticipation

Peter



  #3   Report Post  
Old July 28th 03, 07:06 AM
Ed Cregger
 
Posts: n/a
Default

I will go so far as to say that even in the configuration that you described
(original poster) it will easily outperform any $400 to $500 multiband
vertical antenna that you can buy (figured on the highest average
performance on the most available bands). Good enough?

Ed Cregger, NM2K




  #4   Report Post  
Old July 28th 03, 07:21 AM
Sarge
 
Posts: n/a
Default

I thought the feedline could not be near the METAL mast... Am I wrong?


Ed Cregger wrote:
I will go so far as to say that even in the configuration that you
described (original poster) it will easily outperform any $400 to
$500 multiband vertical antenna that you can buy (figured on the
highest average performance on the most available bands). Good enough?

Ed Cregger, NM2K



  #5   Report Post  
Old July 28th 03, 07:33 AM
Ed Cregger
 
Posts: n/a
Default

So use PVC, or some other work around.

Ed Cregger


"Sarge" wrote in message
...
I thought the feedline could not be near the METAL mast... Am I wrong?


Ed Cregger wrote:
I will go so far as to say that even in the configuration that you
described (original poster) it will easily outperform any $400 to
$500 multiband vertical antenna that you can buy (figured on the
highest average performance on the most available bands). Good enough?

Ed Cregger, NM2K








  #6   Report Post  
Old July 28th 03, 01:11 PM
Greg Milligan
 
Posts: n/a
Default

Dan Richardson wrote:

On Mon, 28 Jul 2003 01:21:17 -0500, "Sarge" wrote:

I thought the feedline could not be near the METAL mast... Am I wrong?


If you are using the popular 450-Ohm window line you need only keep
the line 2½-3 inches away from you mast. Additionally twist it a bit
(about 180º every couple of feet) and you'll be fine.

Danny, K6MHE



Im slightly puzzled by your last statement. Why will twisting it have any
affect?

regards

greg G1CPU
  #7   Report Post  
Old July 28th 03, 01:23 PM
David J. Windisch
 
Posts: n/a
Default

It exposes both sides "evenly" to the mast, reducing proximity effects.
73, Dave, N3HE

SNIP

Im slightly puzzled by your last statement. Why will twisting it have any
affect?

regards

greg G1CPU



  #8   Report Post  
Old July 28th 03, 05:55 PM
Greg Milligan
 
Posts: n/a
Default

W5DXP wrote:

Greg Milligan wrote:
Im slightly puzzled by your last statement. Why will twisting it have any
affect?


Twisting tends to expose both transmission wires to the same environment.
For instance, if you ran one wire 0.5" away from sheet metal and the other
wire 1.5" away from the same metal, you would unbalance your currents
because of the metal's effect on the closest wire.
--
73, Cecil, W5DXP


Thnaks Dave and Cecil for your explanations, it now seems to make sense to
me.

Cheers

Greg G1CPU
  #9   Report Post  
Old July 28th 03, 06:01 PM
W5DXP
 
Posts: n/a
Default

Greg Milligan wrote:
Im slightly puzzled by your last statement. Why will twisting it have any
affect?


Twisting tends to expose both transmission wires to the same environment.
For instance, if you ran one wire 0.5" away from sheet metal and the other
wire 1.5" away from the same metal, you would unbalance your currents
because of the metal's effect on the closest wire.
--
73, Cecil, W5DXP

  #10   Report Post  
Old July 28th 03, 08:44 PM
'Doc
 
Posts: n/a
Default



Greg,
Aside from the electrical affects of twisting the
twin lead you also have the benefit of making it less
affected by wind. It 'flops' around less than if it
wasn't twisted. Ever noticed how the 'tape' advertising
thingys are really affected by wind if they are ~not~
twisted?
'Doc
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Using a G5RV on 60m Antenna 0 July 11th 03 01:05 AM


All times are GMT +1. The time now is 04:04 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017